ADTRAN ATLAS 810 Plus - Manual (Page 66)

Chapter 6. Terminal Menu and System Control
6-14 ATLAS 810 PLUS User Manual 61200266L1-1
»» Access Rights Write security: 0; Read security: 5
Defines the password level for the corresponding label. You can select from
six different password levels (see also Table 6-1 on page 6-2).
»» Active Write security: 0; Read security: 5
Displays the number of users for each label that are currently logged into
the system.
» Licenses Menus to enable optional ATLAS feature upgrades (Frame Relay, etc.).
»» Feature Names the ATLAS feature upgrade.
»» License Key Displays the license key of the feature upgrade.
»» Serial Number Displays the serial number of the feature upgrade.
»» Lic cnt Displays the number of instances of the feature that the license provides.
This field may not be applicable for a given feature—if it is not, this field is
blank.
»» Status Reflects the status, Permanent or Temporary, of the feature upgrade license
key.
Instructions for Changing Passwords
Step Action
1 Select the Password field—a new Password field displays.
2 Type the new password in the Enter field.
3 Type the new password again in the Confirm field.
The password can contain up to 12 alphanumeric characters. You
can also use spaces and special characters in the password.