ADTRAN ATLAS 810 Plus - Manual (Page 68)

Chapter 6. Terminal Menu and System Control
6-16 ATLAS 810 PLUS User Manual 61200266L1-1
>
SYSTEM
UTILITY
Use the System Utility menu to view and set the system parameters shown
in Figure 6-4.
Figure 6-4. System Utility Menu
» Update Firmware Write security: 1; Read security: 5
Updates firmware when ATLAS 810
PLUS
enhancements are released. Two
transfer methods are available for use in updating any modules that contain
Flash memory—including the ATLAS system controller.
The first transfer method uses the ATLAS serial Chain In port of the system
controller and XMODEM protocol. For detailed information on how to up-
date firmware using this method, see XMODEM Firmware Updates on page
10-1.
The second transfer method uses the ATLAS built-in Ethernet port of the
system controller and TFTP (Trivial File Transfer Protocol). For detailed in-
formation on how to update firmware using this method, see TFTP Firmware
Updates on page 10-4.
»» Module Slot Write security: 1; Read security: 5
Displays the slot you selected for firmware updating. When this option first
appears,
None Selected
ý displays. When you move the cursor to this field
and press Enter , a dialog box opens, allowing you to select Slot 0 through
Slot 8 or All Modules of a Type. ( All Modules of a Type is useful if several
identical modules are installed in the ATLAS 810
PLUS
).
The available update options vary depending on whether you
select
Slot 0 , Slots 1 through 8 , or All Modules of a Type .