ADTRAN ATLAS 810 Plus - Manual (Page 107)

Chapter 9. Dial Plan Terminal Menu
61200266L1-1 ATLAS 810 PLUS User Manual 9-13
lowing configuration menu is available (in addition to the standard Net-
work Termination/PRI configuration menus and options):
» Secondary
Interfaces
Write security: 3; Read security: 5
Defines the additional PRI interfaces controlled by the D-channel on this
endpoint.
» Slot, Port Write security: 3; Read security: 5
Defines the slot and port in which the additional interface terminates.
» Interface Number Write security: 3; Read security: 5
Defines the interface number (assigned by the network provider) that
uniquely identifies each additional interface.
Quad T1/PRI Module (Network Termination/RBS)
When you are working in the Network Termination section of the Dial Plan
menu, Slot is defined as a T1/PRI module, and Sig is set to RBS, the follow-
ing interface configuration options are available:
»» First DS0 Write security: 2; Read security: 5
Defines to ATLAS the DS0s which will be used for this endpoint. These are
the DS0s which ATLAS will use to send and receive calls to and from the
Network (PSTN). Outgoing calls which will be allowed or restricted over
these DS0s are set by the
Outgoing Call Accept and Reject Numbers dis-
cussed earlier.
»» Number of DS0s Write security: 3; Read security: 5
Specifies the number of DS0s already defined for this endpoint. This field is
read-only.