ADTRAN ATLAS 810 Plus - Manual (Page 121)

Chapter 9. Dial Plan Terminal Menu
61200266L1-1 ATLAS 810 PLUS User Manual 9-27
After completing the network entries, the Network connection map appears
as shown in Figure 9-6.
7
Back out of the connection to the index number column by
pressing ESC on the keyboard.
8
Insert three more connections into the list for the BRI lines by
typing the letter I three times.
9
Enter Out#Accept and Out#Reject numbers for Slot 1/ Port 1 .
The Out#Accept numbers have two entries:
10
Set the BRI switch type (from Ifce Config) used by the network to
National ISDN. From SPID, enter the SPID numbers and phone
numbers which match the network provisioning for this BRI line.
11 Press ESC to return to the index column, #.
Setting PRI B Global Param
Step Action
1 While on the entry for BRI A, type C to copy the entire BRI A entry.
2
Move to the next connection list entry and type P to paste all of the
BRI data.
3 Move to each field and modify as appropriate for BRI B.
Setting PRI C Global Param
Step Action
1 While on the entry for BRI B, type C to copy the entire BRI B entry.
2
Move to the next connection list entry and type P to paste all of the
BRI data.
3 Move to each field and modify as appropriate for BRI C.
Setting PRI A Global Param (Continued)
Step Action
Entry 1) 888-01[0,1]X
Entry 2) 888-0120
Allows all numbers 888-0100 to 888-0120