ADTRAN ATLAS 810 Plus - Manual (Page 64)

Chapter 6. Terminal Menu and System Control
6-12 ATLAS 810 PLUS User Manual 61200266L1-1
(ESF) DS1. The default value is 132,960 CRC errors for an approximate BER
level of 10E-5.
Total LES Thrsh The DS1 performance monitor Threshold Value for the Total Line Errored
Seconds (LES) parameter. The default value is 648 for an approximate BER
level of 10E-5.
Total LCV Thrsh The DS1 performance monitor Threshold Value for the Current 15 minute
Line Code Violations (LCV) parameter. The default value is 133,400 for an
approximate BER level of 10E-5.
» Event Logging Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the
ATLAS 810
PLUS
system event types. Whenever a system event occurs, that
event is logged if the event’s severity level is equal to or more severe than
the event type’s current threshold setting. See System Event Logging on page
A-1 for detailed information on the system events.
» Syslog Setup Write security: 3; Read security: 5
Configures the ATLAS Syslog client for use with a Syslog server (supplied
on ADTRAN /Utility disk or available on most UNIX platforms).
»» Transmission Enables or disables the transmission of log events to the external Syslog
server.
»» Host IP Address Lists the IP address of the external server that is running the Syslog host dae-
mon.
»» Host Facility Specifies the facility destination of log events. Facilities are located on the
host and are managed by the Syslog host daemon running on either a UNIX
machine or a PC.
» Real Time Clock Write security: 3; Read security: 5
Provides access to the following two options that you can review and edit:
»» Current Time/Date Displays the current date and time, including seconds. To edit this field, en-
ter the time in 24-hour format (such as 23:00:00 for 11:00 pm), and enter the
date in mm-dd-yyyy format (for example, 09-23-1998).
»» Auto Daylight
Savings
When enabled, automatically updates the time and date when Daylight Sav-
ings Time starts and, also, when Standard Time starts.