Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 34)

Instruction Manual PD 300
mg/L (ppm) Measurement Mode
dPr: Dissolved Oxygen parameters
• Select Hg or Pa barometric pressure units
• Select barometric pressure
• Select salinity adjustment factor
Instructions on page 37.
CAL: Viewing previous calibration data
• View previous calibration data
Instructions on page 41.
ELE: Viewing probe data
• View probe slope
• View mV value equivalent to 100% saturation
• View mV value equivalent to 0% saturation
Instructions begin on page 42.
COF: Unit configuration
• Ready indicator ON or OFF / auto endpoint ON
or OFF
• Select mg/L or ppm units
• Select °C or °F
Instructions begin on page 44.
LCd: Backlit display
• Adjust brightness of backlit LCD
Instructions on page 48.
rSt: Reset to factory default
• Reset to factory default settings
Instructions on page 49.
29