Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 7)

Instruction Manual PD 300
2 DISPLAY AND KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display.
• The primary display shows the measured pH or DO value (either in mg/L, ppm
or %, depending on units of measurement selected).
• The secondary display shows the measured temperature.
The display also shows error messages, keypad functions, and program functions. See Figure
2.
Figure 2: Full LCD Screen
1 . SETUP mode indicator 7 . Oxygen solubility indicator in
mg/L or ppm.
13 . Probe indicator
2 . MEASurement mode indicator 8 . Temperature indicator 14 .Calibration indicator
3 . CALibration indicator 9 . pH buffer indicator 15 Function ON / OFF
indicator
4 . pH indicator 10 . Automatic Temperature
Compensation indicator
16 HOLD indicator
5 . % saturation indicator 11 . ERRor indicator 17 READY indicator
6 . ppt indicator for input of
Salinity value.
12 . Low battery indicator
2