Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 53)

Instruction Manual PD 300
8.11 P6.0 [P5.0] LCd: Adjusting LCD Brightness
NOTE
This function is only available through DO measurement mode (% saturation or mg/L)
This mode lets you adjust the brightness of the backlit LCD. Selecting a dimmer back-lighting
level helps conserve batteries.
From measurement mode
1. Press SETUP key to enter SETUP mode.
2. Press ▲ or ▼ keys to scroll through subgroups
until you view parameter “LCd” in the upper
display.
3. Press the ENTER key. A number (0 – 8) appears
in the upper display and “LCd” appears in the
lower display.
4. Press ▲ or ▼ keys to select from level 0
(dimmest light) to level 8 (brightest light).
5. Press the ENTER key to confirm selection and to
return to the subgroup menu. Press the
CAL/MEAS key to return to measurement mode.
Figure 40: Adjusting LCD
brightness
48