Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 69)

Instruction Manual PD 300
Oakton Instruments
Item Oakton Instruments
Ordering Code
PD 300 meter with DO/Temp probe (35640-50) and pH probe (35805-23) 35632-00
PD 300 meter only 35632-02
PD 300 meter with DO/Temp probe (35640-50) and pH probe (35805-23),
electrode maintenance kit (35640-80), pH calibration solutions, and hard
carrying case. 35632-60
Single-junction pH electrode, BNC, ABS body, 25-mm diameter, 10 ft (3 m)
cable 35805-23
Double-junction pH electrode, BNC, ABS body, 25-mm diameter, 10 ft (3 m)
cable 35805-24
Submersible DO/Temp electrode with 10 ft (3 m) cable 35640-50 (also
includes 35640-80)
Submersible DO/Temp electrode with 25 ft cable 35640-52 (also
includes 35640-80)
Submersible DO/Temp electrode with 50 ft cable 35640-54 (also
includes 35640-80)
Submersible DO/Temp electrode with 100 ft cable 35640-56 (also
includes 35640-80)
Membrane cap assembly (membrane, o-ring, membrane lock, bottom cap) 35640-72
Maintenance kit for DO electrode. Two membrane cap assemblies (35640-72)
and a 30-mL bottle of electrolyte. 35640-80
Membrane installation tool. Required for 35640-74 & 35640-75 35640-79
Electrolyte solution, 500 mL 35640-71
Replacement membranes, pack of 5 35640-74
Replacement membranes, pack of 25 35640-75
Hard carrying case 35632-98
Temperature probe for pH or temperature only reading with PD 300 meter.
Note: DO reading is not possible when this probe is used. 35618-05
64