Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 52)

Instruction Manual PD 300
8.10.3 P5.2 [P4.3] Selecting °C or °F Temperature Unit
This meter lets you select between °C and °F units for temperature readings.
From measurement mode
1. Press SETUP key to enter SETUP mode.
2. Press ▲ or ▼ keys to scroll through subgroups
until you view parameter “COF” in the upper
display.
3. Press the ENTER key until “C” or “F” appears in
the upper display.
4. Press ▲ or ▼ keys to toggle between °C and °F.
5. Press the ENTER key to confirm selection and to
return to the subgroup menu. Press the
CAL/MEAS key to return to measurement mode.
Figure 39: To change from units of
measurement for temperature
Note: Any changes made to the temperature unit
selection will change in the pH mode as well.
47