Thermo Fisher Scientific CyberScan PD 300 - Manual (Page 48)

Instruction Manual PD 300
6. Press the ENTER key. The upper display shows the
100% saturation mV value.
7. Press the ENTER key. The upper display shows the 0%
saturation mV value.
8. Press the ENTER key to move back to subgroup “ELE”.
If you want to return to measurement mode, press
CAL/MEAS.
(The values shown above are for illustration purpose. Your meter may display
different values depending on the settings & your environmental conditions)
Figure 34: View electrode
properties from mg/L
(ppm) mode
43