West Control Solutions Pro-EC44 - Manual (Page 208)

Pro-EC44 2-Loop Graphical Profile Controller & Recorder
Pro-EC44 Product Manual - 59540-1 October 2013 Page 201
Read a Profile Name
This command requests the name of a specific profile. The instrument responds with the
name of the profile number requested.
Read Profile Name - Request (to instrument)
Field Name Data Comments
Dec Hex
Unit Address A/R A/R The ID address of the instrument
Function Code 23 17 Requires the multi read/write function
Read Start Address High Byte 32 20
Read Start Address Low Byte 6 6
Read Quantity Of Registers High Byte 0 0
Read Quantity Of Registers Low Byte 8 8
Write Start Address High Byte 32 20
Write Start Address Low Byte 6 6
Write Quantity Of Registers High Byte 0 0
Write Quantity Of Registers Low Byte 2 2
Byte Count 4 4
Command Code High Byte 80 50
Command Code Low Byte 78 4E
Profile Number High Byte A/R A/R
Profile Number Low Byte A/R A/R
CRC High Byte A/R A/R
CRC Low Byte A/R A/R
The instrument replies to the Read Profile Name request as follows:
Read Profile Name - Response (from instrument)
Field Name Data Comments
Dec Hex
Unit Address A/R A/R The ID address of the instrument
Function Code 23 17 The multi read/write function
Byte Count 16 10
Profile Name Character 1 A/R A/R
The ASCII codes equivalent to each of the 16
characters of the profile name, e.g. :
A = 65dec / 0x41, B = 66dec / 0x42 etc.
a = 97dec / 0x61, b = 98dec / 0x62
The space character (32dec / 0x20hex) is used
to fill any unused characters at the end of the
name.
Profile Name Character 2 A/R A/R
Profile Name Character 3 A/R A/R
Profile Name Character 4 A/R A/R
Profile Name Character 5 A/R A/R
Profile Name Character 6 A/R A/R
Profile Name Character 7 A/R A/R
Profile Name Character 8 A/R A/R
Profile Name Character 9 A/R A/R
Profile Name Character 10 A/R A/R
Profile Name Character 11 A/R A/R