West Control Solutions Pro-EC44 User Manual
Page 4
Pro-EC44 2-Loop Graphical Profile Controller & Recorder
Pro-EC44 Product Manual - 59540-1 October 2013
Page i
This manual supplements the Concise Product manual supplied with each instrument at the
time of shipment. Information in this installation, wiring and operation manual is subject to
change without notice.
Copyright © October 2013, Danaher Corporation, all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed or stored in a retrieval system, or
translated into any language in any form by any means without the written permission of
Danaher/West Control Solutions.
Copies of this manual are available in electronic format on the West Control Solutions web
site Printed versions may be purchased from West Control Solutions or
its representatives.
WARNING:
THE INTERNATIONAL HAZARD SYMBOL IS INSCRIBED
ADJACENT TO THE REAR CONNECTION TERMINALS. IT IS IMPORTANT
TO READ THIS MANUAL BEFORE INSTALLING OR COMMISSIONING THE
UNIT.
WARNING:
THIS SYMBOL MEANS THE EQUIPMENT IS PROTECTED
THROUGHOUT BY DOUBLE INSULATION.
WARNING:
PRODUCTS COVERED BY THIS MANUAL ARE SUITABLE FOR
INDOOR USE, INSTALLATION CATEGORY II, POLLUTION CATEGORY 2
ENVIRONMENTS.
Note: It is strongly recommended that applications incorporate a high or low limit
protective device, which will shut down the equipment at a pre-set process
condition in order to prevent possible damage to property or products.
This user guide covers all versions of the West Pro-EC44 controller.
©WCS
– Product & specifications may be subject to change without notice - E&OE