Brother PE-DESIGN Ver.5 - Manual (Page 103)

95
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
NOTE:
The maximum value that can be entered is the largest value that will not allow the pattern to
exceed the size of the Design Page.
The minimum value is 1 mm (0.04 inch).
See also: “Select System Unit” on page 107
■
Numerical Setting-Rotate
Purpose: Rotates the selected pattern numerically.
Shortcut key: No shortcut key for this function.
Toolbar: No button for this function.
Operation:
1
Select one or more patterns. (Stage 3 only)
2 Click Edit , then Numerical Setting , then Rotate .
The Rotate dialog appears.
NOTE:
The range of values that can be entered is between 0 and 359 degrees, in 1-degree increments.
■
Select All
Purpose: Selects all the data.
Shortcut key: +
Toolbar: No button for this function
Operation:
1
Click Edit , then Select All (Stage 3 only).
◆ The desired rotation angle can be
entered by either typing in a value or
clicking the arrows to select the desired
value.
Select
0 degree to leave the pattern
unchanged.
◆ Click
OK to confirm.
◆ Click
Preview to view the pattern
rotated the specified angle in the
Design Page.
◆ Click
Cancel to exit without making any
changes.
Ctrl E