Brother PE-DESIGN Ver.5 - Manual (Page 199)

191
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
2 In the Select Mask dialog, click Next to display the Photo Stitch Parameters dialog similar to the
one shown below.
Sewing Option:
Auto Select Setting:
Auto Select:
Click this button to select from the selected thread chart the thread colors closest to the four colors
in the selected color set. The selected thread colors appear in the Use Color List mentioned below.
This button can be clicked if the settings for Auto Select Setting have been changed.
Use Color List:
Allows the selected thread colors to be checked and edited.
◆ Specify the settings for creating Photo Stitch
data.
◆ Click
Previous to return to the previous dia-
log.
◆ Click
Next to apply the settings to the Photo
Stitch data, and display the next dialog.
◆ Click
Cancel to close this dialog.
Line Interval
Specifies the interval of parallel lines used to create embroidery data.
Range: 1.2 - 5 mm (0.05 - 0.2 inch)
Default: 2 mm (0.08 inch)
Max. Density
Specifies the maximum density for areas of the created embroidery data
sewn with the zigzag stitch. The embroidery data will be created with a
density smaller than that set here.
Range: 2.5 - 5 lines per mm (64 - 127 lines per inch)
Default: 3 lines per mm (76 lines per inch)
Thread Chart
Selects the thread chart for selecting the thread color with the Auto
Select function.
The most appropriate thread color from the selected thread chart is
selected.
A user thread chart can also be selected.
Color Set
Sets the combination of four colors used when creating embroidery
data.
The color choices are: cyan (C), magenta (M), yellow (Y), black (K), red
(R), green (G) and blue (B). Select one of the following combinations
that contains the colors most used in the image.
Color combinations: CMYK, RGBK, CRYK, BMYK
Line interval