Brother PE-DESIGN Ver.5 - Manual (Page 189)

181
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Deleting an image:
Press . The image will be deleted from the Design Page.
■
Image to Stitch Wizard
Purpose: Gives step-by-step instruction for creating embroidery data from image data.
Shortcut key: No shortcut key for this function
Toolbar:
Operation:
1
Use one of the commands on the Input sub-menu of the Image menu to prepare the image data
that will be used to create the embroidery data.
2 Click Image , then Modify , and then re-size and re-position the image data for creating the embroi-
dery data.
3
Click Image , then Image to Stitch Wizard .
The following dialog will appear. (If there is no image in the Design Page, the dialog appears after
an image is imported from a file.)
◆ Select
Auto Punch to automatically
extract the image boundaries in order
to create the embroidery data.
◆ Select
Photo Stitch 1 to automatically
create realistic photo embroidery. This
can be set to color or black and white.
◆ Select
Photo Stitch 2 to automatically
create realistic photo embroidery in 4
colors or 1 color.
◆ Select
Cross Stitch to create cross-
stitch.
◆ Select
Design Center to run Design
Center with the Design Page Image.
◆ Select the type of embroidery that you
wish to create, and then click Next .
◆ Click
Cancel to quit the operation.
Delete