Brother PE-DESIGN Ver.5 - Manual (Page 217)

209
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
H-Arrange
(Horizontal Arrange)
Sets the horizontal arrangement of the
pattern. For patterns like , patterns will
be arranged along the line as shown
below.
V-Arrange
(Vertical Arrange)
Sets the vertical arrangement of the pat-
tern. For patterns like , patterns will be
arranged along the line as shown below.
Row Offset
When the pattern arrangement is offset, sets the amount of
offset for each row.
Range: 0 - 10 mm (0.06 - 0.20 inch)
Default: 0 mm (0.10 inch)
Direction
Allows you to rotate the angle of the Motif patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Run Pitch
Sets the pitch of the sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Cross stitch only:
Size
Sets the horizontal and vertical size of the pattern.
Range: 1.5 - 5 mm (0.06 - 0.20 inch)
Default: 2.5 mm (0.10 inch)
Times
Sets the number of times that the pattern will be sewn. Sews
twice per time.
Range: Single, Double, Triple
Default: Single
Feathered Edge only:
Feathered Side
Sets which side of the sewing direction to apply the Feathered
edge setting to.
When creating data in Manual Punch mode, the Topside has
organization points 1-3, and the Bottom side has organization
points 2-4.
Top: Feathered Edge is sewn on the Topside.
Bottom: Feathered Edge is sewn on the Bottomside.
Pattern
Selects a pattern to use with the Feathered Edge.
Click
Select Pattern , and the Browse dialog will open.
Scroll through the available Feathered Edge patterns and dou-
ble-click the desired pattern or click
OK to select the pattern
Max length
Sets the length of feathered edge.
Range: 0.2 - 100 mm (0.01 - 3.94 inch)
Default: 3 mm (0.12 inch)
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate: