Brother PE-DESIGN Ver.5 - Manual (Page 93)

85
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
■
Open
Purpose: Opens a previously saved file (*.PEM, *.PEL) or image file (Windows BMP
(*.bmp), Exif (*.tif, *.jpg), ZSoftPCX (*.pcx), Windows Meta File (*.wmf), Portable
Network Graphics (*.png), Encapsulated PostScript (*.eps), Kodak PhotoCD
(*.pcd), FlashPix (*.fpx), JPEG2000 (*.j2k).
NOTE:
For pcd and fpx files that are saved on many pages, only the first page can be
opened. Tif files that have used LZW compression can not be opened.
Shortcut key: +
Toolbar:
Operation:
1
Click File , then Open .
A Open dialog similar to this will display.
2 The selected file opens immediately if your current Design Page is not edited.
If the current Design Page is edited, you will be asked whether you want to save the changes.
3
Depending on the stage you are currently using and the editing you did, the file to be saved is a
*.pel file or a *.pem file or both.
See also: “New Line Image” on page 82, “Save” and “Save As” on page 89
◆ Select the drive, the folder and the file
name.
• Be sure to select the right type of file
extensions in
List Files of Type .
• If the Preview check box is checked, the
content of the selected file displays in
the preview window.
◆ Click
Open or double-click the file name
to open the file in Design Center.
◆ Click
Cancel to exit.
◆ Click
Yes to save the Design Page first.
◆ Click
No to abandon the Design Page.
◆ Click
Cancel to do anything else (for
example, modifying the current Design
Page or saving it with another file name).
Ctrl O