Brother PE-DESIGN Ver.5 - Manual (Page 197)

189
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
3 In the Gray Balance dialog, click Next to display the Photo Stitch Parameters dialog similar to the
one shown below.
Sewing Option:
Image Type:
Use Color:
Specifies the color of thread used to create the embroidery data.
The default setting is the darkest color in the current thread chart.
◆ Specify the settings for creating Photo Stitch
data.
◆ Click
Previous to return to the previous dia-
log.
◆ Click
Next to apply the settings to the Photo
Stitch data, and display the next dialog.
◆ Click
Cancel to close this dialog.
Detail
Specifies how detailed the created embroidery data will be. Selecting a
setting closer to
Fine creates more details in the data and increases the
number of stitches.
Run pitch
Sets the sewing pitch. The pattern is created with this setting value as
the minimum length.
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 3 mm (0.12 inch)
Conversion Priority
Select what parameter is given priority when converting to embroidery
data.
Stitch Quality : Creates data while giving priority to the stitching quality.
However, many jump stitches will result.
Jump Stitch Reduction : Creates data while giving priority to reducing the
number of jump stitches in order to reduce complications during embroi-
dering. However, the stitching quality will be slightly reduced.
Photo/Cartoon
If Photo is selected, the thread colors will be mixed together, which will
result in a more natural look.
If
Cartoon is selected, the thread colors will not be mixed together, which
will result in a more simply colored look.
Select
Photo for image data from a photograph, etc. Select Cartoon for
image data from an illustration, etc.
(If there are less than 16 colors in the image data, the default selection
is
Cartoon .)