Brother PE-DESIGN Ver.5 User Manual
Page 110
102
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable
Stitch Creator
Quick Reference
Alphabetic Index
3
To check and review the sewing order of the parts of the same color, select a color in the
Color
tab,
then click the
Part
tab.
The parts to which you attributed the selected color are displayed in gray.
Note that all inside regions are always sewn before the outlines. If you set an outline to be sewn
first, it will be the first outline to be sewn, but will still be sewn after all inside regions.
See also:
◆ Click
. The part that will be sewn first
displays.
◆ Click
or
to review the parts that
will be sewn between the first and last.
•
As
you
click , , ,
or ,
the corresponding parts display.
◆ Click
to see the part that will be sewn
last.
◆ Click
if you want the selected part to be
sewn last.
◆ Click
if you want the selected part to be
sewn first.
◆ Click
to move the selected part one
spot back in the sewing order.
◆ Click
to move the selected part one
spot forward in the sewing order.
◆ Click
OK
to confirm.
◆ Click
Cancel
to exit.