Brother PE-DESIGN Ver.5 - Manual (Page 216)

208
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Fill stitch only:
Step Pitch
Sets the pitch of the steps.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 4 mm (0.16 inch)
Frequency
Sets the spacial frequency steps.
Range: 0 - 99%
Default: 30%
Programmable fill stitch only:
Pattern
Select a pattern for Programmable Fill Stitch.
Click
Select Pattern , and the Browse dialog opens. Select the
folder containing the pas file you want to open. Scroll through
the available stitch patterns and double-click the desired pat-
tern or click
OK to select the pattern
Pattern Size
Width
Sets the stitch pattern width.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Height
Sets the stitch pattern height.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Offset
Direction
Sets the offset arrangement of the pattern, and sets the direc-
tion of offset as Row/Column.
Value
When the pattern’s arrangement is offset, sets the amount of
offset.
Range: 0 - 99%
Default: 0%
Direction
Allows you to rotate the angle of the stitch patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Motif Stitch only:
Use Pattern
Selects whether to use pattern 1 or pattern 2 for Motif. If you
choose to use both patterns, the data is created so that sewing
is alternated between them after each row.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2
Pattern
Select a pattern for Motif sewing.
Click
Select Pattern , and the Browse dialog will display. Select
the folder containing the pmf file you want to open. Scroll
through the available stitch patterns and double-click the
desired pattern or click
OK to select the pattern.
Pattern Size
Width
Sets the pattern width (the direction along the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Height
Sets the pattern height (the direction perpendicular to the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Step pitch
0%
30%