Brother PE-DESIGN Ver.5 - Manual (Page 145)

137
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Setting Geometric Attributes
■
Arc shape
Purpose: Selects the type of arc.
Available: When you click on the Tool Box to start the Circle and Arc Drawing mode.
Operation:
1 Click the Arc shape selector.
The options display.
2
Click one of the options.
The setting applies to all the patterns that you will create in the Circle and Arc Drawing mode until
you change the setting.
See also: “Circle and Arc Drawing Mode” on page 128
■
Edge radius
Purpose: Sets the corners of rectangles.
Available: When you click on the Tool Box to start the Rectangle Drawing mode.
When you select an existing rectangle with the cursor in Selection mode.
Embroidery attributes
Line sew: Switches the outline on/off. When the outline is
switched off, it is not sewn (and you cannot set its color or
stitch).
page 142
Region sew: Switches the inside region on/off. When the
inside region is switched off, it is not sewn (and you cannot set
its color or stitch).
page 143
Line color, Region color, Text color, Punch color: Sets the
thread color for outline, region inside, text, manual punching
pattern and imported pattern (after the Stitch to Block function
has been applied).
page 144
Special colors page 145
Line sew type: Sets the stitch for the outlines.
Region sew type: Sets the stitch for outline, region inside, text,
manual punching pattern and imported pattern (after the Stitch
to Block function has been applied). page 146