Brother PE-DESIGN Ver.5 User Manual
Page 202
194
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable
Stitch Creator
Quick Reference
Alphabetic Index
3
In the Gray Balance dialog, click
Next
to display the Photo Stitch Parameters dialog similar to the
one shown below.
Sewing Option:
Use Color:
Specifies the color of thread used to create the embroidery data.
The default setting is the darkest color in the current thread chart.
4
Click
Next
in the Photo Stitch Parameters dialog to display a Preview dialog similar to the one
◆ Specify the settings for creating Photo Stitch
data.
◆ Click
Previous
to return to the previous dia-
log.
◆ Click
Next
to apply the settings to the Photo
Stitch data, and display the next dialog.
◆ Click
Cancel
to close this dialog.
Line Interval
Specifies the interval of parallel lines used to create embroidery data.
Range: 1.2 - 5 mm (0.05 - 0.2 inch)
Default: 2 mm (0.08 inch)
Max. Density
Specifies the maximum density for areas of the created embroidery data
sewn with the zigzag stitch. The embroidery data will be created with a
density smaller than that set here.
Range: 2.5 - 5 lines per mm (64 - 127 lines per inch)
Default: 3 lines per mm (76 lines per inch)
Change Color
Click this button to open the Thread Color dialog, which lets you change
the thread color used in the embroidery data.
Line interval