Brother PE-DESIGN Ver.5 User Manual
Page 168
160
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable
Stitch Creator
Quick Reference
Alphabetic Index
4
From the Available patterns list, click the pattern that you want to write to the card. The highlighted
pattern is selected.
Then, click
to add the selected pattern to the Selected patterns list.
5
Continue this operation for all patterns that you wish to write to an original card. Viewing the Card
capacity indicator during this process will allow you to plan which designs you would like to save
an original card.
Reading the Card capacity indicator:
The part indicating selected patterns is shown in blue, and the part indicating the pattern being
selected is shown in light blue.
If the part indicating the pattern being selected appears in red, the size of the selected patterns
has exceeded the capacity of an original card.
6
After the patterns to be written to the card are selected, click
to write the data to the card. The
data is written to an original card after all data already on the card is erased.
After a short while, the data is finished writing to an original card. Now, the card containing the
data can be used with the embroidery machine.
•
If there are any patterns on the card that you do not wish to erase, be sure to select the card in the
Folder dialog box, and then add the patterns to the Selected patterns list.
•
Do not remove the card or unplug the USB cable while data is being written to the card (while the LED
indicator is flashing).