Brother PE-DESIGN Ver.5 - Manual (Page 254)

246
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
■
Delete
Purpose: Removes the selected line(s) from the screen without saving them in the clip-
board.
Shortcut key:
Toolbar: No button for this function
Operation:
1
Select one or more lines.
2 Click Edit , then Delete .
The selected line(s) are removed from the screen. Since they are not saved in the clipboard, the
only way to make them reappear is to use
Edit - Undo .
See also: “Undo” on page 244 and “Cut” on page 245
■
Mirror – Horizontal
Purpose: Flips the selected line(s) up/down.
Shortcut key: +
Toolbar:
Operation:
1 Select one or more lines.
2 Click Edit , then Mirror , then Horizontal .
The selected line(s) are replaced by their horizontal mirror image (top and bottom inverted). Two
successive applications of this function restores the original image.
See also: “Mirror – Vertical” and “Rotate” below
■
Mirror – Vertical
Purpose: Flips the selected line(s) left/right.
Shortcut key: +
Toolbar:
Operation:
1 Select one or more lines.
2
Click Edit , then Mirror , then Vertical .
The selected line(s) are replaced by their vertical mirror image (left and right inverted). Two suc-
cessive applications of this function restores the original image.
See also: “Mirror – Horizontal” above and “Rotate” below
■
Rotate
Purpose: Allows you to manually rotate the selected line(s) by an arbitrary angle.
Shortcut key: +
Toolbar:
Delete
Ctrl H
Ctrl J
Ctrl Y