Brother PE-DESIGN Ver.5 - Manual (Page 191)

183
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
In addition, whether all areas in certain colors will or will not be sewn can be specified in the Omit
Colors list in the upper-right corner of the dialog.
Colors that are crossed out are set to not be sewn.
Click on a color to specify whether or not it will be sewn.
3 After the necessary settings are selected, click Finish .
Embroidery data is created from the outline of the analyzed data, the appropriate thread color and
stitch settings are applied, and then the data is pasted into the Design Page.
The stitch settings of the created embroidery data can later be changed in the same way as the
settings for other shape objects are.
If Photo Stitch 1 (Color) is selected:
1
A Select Mask dialog similar to the one shown below appears.
In this dialog, set the boundaries of the Photo Stitch and make adjustments to the image data.
◆ Click
Image Tune to open the Image
Tune dialog, where you can edit the
image (see below).
◆ Click
Next to display the next dialog.
◆ Click
Cancel to close this dialog.
◆ Click
Previous to return to the previous
dialog.