Brother PE-DESIGN Ver.5 - Manual (Page 50)

42
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
3 Set the sewing attributes of the outline stitch.
Select
Sew – Sewing Attribute Setting . You can also click the button of the Toolbar shown below.
The Sewing Attribute Setting dialog opens.
4
Set the sewing attributes of the region. Click on the Region sew button so that the Region color
button and the Region sew type selector appear and select a region color and a
stitch. In this example, we will leave the other sewing attributes of the region as is.
Your display will look as follows.
◆ Set the width of the zigzag stitch to
1.0 mm .
◆ Click
Apply .