Brother PE-DESIGN Ver.5 - Manual (Page 107)

99
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Motif stitch only:
Use Pattern
Selects whether to use pattern 1 or pattern 2 for Motif. If you
choose to use both patterns, the data is created so that sewing
is alternated between them after each row.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2
Pattern
Select a pattern for Motif sewing.
Click
Select Pattern , and the Browse dialog will display. Select
the folder containing the pmf file you want to open. Scroll
through the available stitch patterns and double-click the
desired pattern or click
OK to select the pattern
Pattern Size
Width
Sets the pattern width (the direction along the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Height
Sets the pattern height (the direction perpendicular to the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
H-Arrange
(Horizontal Arrange)
Sets the horizontal arrangement of the
pattern. For patterns like , patterns will
be arranged along the line as shown to the
right.
V-Arrange
(Vertical Arrange)
Sets the vertical arrangement of the pat-
tern. For patterns like , patterns will be
arranged along the line as shown to the
right.
Row Offset
When the pattern arrangement is offset, sets the amount of
offset for each row.
Range: 0 - 10 mm (0.00 - 0.39 inch)
Default: 0 mm (0.00 inch)
Direction
Allows you to rotate the angle of the Motif patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Run Pitch
Sets the pitch of the sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Cross stitch only:
Size
Sets the horizontal and vertical size of the pattern.
Range: 1.5 - 5 mm (0.06 - 0.20 inch)
Default: 2.5 mm (0.10 inch)
Times
Sets the number of times that the pattern will be sewn. Sews
twice per time.
Range: Single, Double, Triple
Default: Single
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate: