Brother PE-DESIGN Ver.5 - Manual (Page 247)

239
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Operation:
1
Click File , then Open .
A Open dialog similar to this will display.
2 When you click Browse , the Browse dialog opens.
3
The selected file opens immediately if your current work area is not edited.
If the current work area is edited, you will be asked whether you want to save the changes.
4
The edited stitch pattern is now saved and the selected file opens.
See also: “New” on page 238, “Save” on page 240, and “Save As” on page 241
◆ Select the drive, the folder and the file
name.
• Be sure the folder you select contains
pas or pmf files.
• If the Preview check box is checked, the
content of the selected file displays in
the preview window.
◆ Click
Open or double-click the file name
to open the file in the work area.
◆ Click
Browse to preview all the available
pas or pmf files in the selected folder.
◆ Click
Cancel to exit.
◆ Browse through the files with the help
of the scroll bar.
A green
→ in the middle of the pattern
display area shows that this is data for
Motif (
*.pmf ). Otherwise, the data is for
Programmable Fill ( *.pas ).
◆ Select a stitch pattern by clicking on it.
The selected pattern is highlighted.
◆ Double-click the selected pattern or
click Open to open the file and to close
both the Open and the Browse dialogs.
The mode will automatically change to
match the selected pattern (
pas or
pmf ).
◆ Click
Cancel to go back to the Open dia-
log.
◆ Click
Yes to save the work area first.
◆ Click
No to abandon the work area.
◆ Click
Cancel to do anything else (for
example, modifying the current work area
or saving it with another file name).