Brother PE-DESIGN Ver.5 - Manual (Page 22)

14
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
Step 4
Using the Wizard and Selecting the Auto Punch Function
1 Click Image on the menu bar, then click Image to Stitch Wizard . Otherwise, click on the Toolbar.
2
On the Select Image to Stitch Method dialog that appears, click the Auto Punch check box to select
it, and then click Next .
Step 5
Automatically Extracting Pattern Outlines
1 Outlines are automatically extracted from the image and the Image Analysis dialog appears.
2
After the necessary settings are selected, click Finish .
• The following stitch methods are also avail-
able.
- Photo Stitch 1 (Color and Mono)
See the function details on page 183.
- Photo Stitch 2 (Color and Mono)
See the function details on page 190.
- Cross Stitch
See the function details on page 195.
- Design Center, Starting Design Center
See “Using Design Center” on page 16 or the
function details on page 61.
◆ Detailed settings for the imported image can
be adjusted and, if Retry is clicked, the new
settings can be applied.
◆ Areas that are not to be sewn appear with a
crosshatch pattern. Click each area to set
whether it should be sewn or not.