Brother PE-DESIGN Ver.5 - Manual (Page 148)

140
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
In addition, the names and samples of installed TrueType fonts appear after the fonts listed in the table above.
If one of these TrueType fonts are selected, the font data is automatically converted to embroidery data.
Font settings can be changed in the
TrueType Font Attribute Setting dialog, which is displayed by click-
ing Text - TrueType Font Attribute Setting .
NOTE:
Some TrueType fonts may not convert well into beautiful embroidery data due to their design and
shape.
See also: “Text Input Mode” on page 127, “Point Edit Mode” on page 120, “TrueType Font
Attribute Setting” on page 202
■
Text size
Purpose: Selects the size for text.
Available: When you click on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
Operation:
1 Type the desired value in the Text size selector (5 - 100 mm or 0.20 - 3.93 inches) and press the
key
or click on the Text size selector to display the available values.
2
Click the desired value.
The setting applies to all the text patterns that you will create in the Text Input mode until you
change the setting.
If a text pattern or characters of a text pattern are selected, the setting also applies to the selec-
tion.
See also: “Text Input Mode” on page 127, “Point Edit Mode” on page 120
Enter