Canon PowerShot S110 - Manual (Page 114)

114
Using Face ID
z z Press the < o><p> buttons or turn the
< 7> dial to choose [Add a New Face],
and then press the < m> button.
2
Register face information.
z z Aim the camera so that the face of the
person you want to register is inside the
gray frame at the center of the screen.
z z A white frame on the person’s face
indicates that the face is recognized.
Make sure a white frame is displayed on
the face, and then shoot.
z z If the face is not recognized, you cannot
register face information.
3
Save the settings.
z z After [Register?] is displayed, press the
< q><r> buttons or turn the <7> dial to
choose [OK], and then press the < m>
button.
X X The [Edit Profile] screen is displayed.
COP
Y