C op y – Canon PowerShot S110 User Manual
Page 311
311
On-Screen Messages
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot register this image!/
Cannot modify/Cannot assign to category/Unselectable image./No
identification information
•
The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies. Magnify* (
= 233), Smart Shuffle* (= 235),
Categorize (
= 245), Rotate (= 243), Edit* (= 250 – 255), Assign as Start-up
Image* (
= 266), Print List* (= 293), Photobook Set-up* (= 296), and Edit ID
Info* (
•
Grouped images cannot be processed (
Invalid selection range
•
When specifying a range for image selection (
attempted to choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
•
More than 998 images were selected for Print List (
= 293) or Photobook Set-up
(
= 296). Choose 998 images or less.
•
Print List (
= 293) or Photobook Set-up (= 296) settings could not be saved
correctly. Reduce the number of selected images and try again.
•
You attempted to choose more than 500 images in Protect (
= 236), Erase
(
= 240), Favorites (= 244), My Category (= 245), Print List (= 293), or
Photobook Set-up (
Communication error
•
An excessive amount of images (approx. 1,000) on the memory card prevented
printing or image transfer to a computer. To transfer the images, use a commercially
available USB card reader. To print, insert the memory card directly into the printer
card slot.
Naming error!
•
The folder could not be created or images could not be recorded, because the highest
supported folder number (999) for storing images on the card has been reached and
the highest supported image number (9999) for images in folders has been reached.
In the [
3] menu, change [File Numbering] to [Auto Reset] (= 269), or format the
memory card (
Lens Error
•
This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
•
Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
COP
Y