Canon PowerShot S110 - Manual (Page 63)

63
Connecting to a Computer
3
Choose [Add a Device].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [Add a Device], and
then press the < m> button.
X X A list of detected access points will be
displayed in the [Access Point Connect]
screen.
X X Proceed to either “Connecting to a WPS
Supported Access Point” ( = 64) or
“Connecting to Access Points in the List”
(
= 67).
X X To manually choose and connect to an
access point, see the supplemental
explanation column ( = 68) in
“Connecting to Access Points in the List”.
• Once a computer is added, the computer name will be displayed on the
screen in step 3. To connect to a computer again, simply choose the
computer name from the list.
• You can also configure this setting through touch-screen operations
(
= 91).
• When a connection destination is set using the Touch Actions setting
(
= 248), you can automatically access the function to connect to the last
connected destination from the next time by just dragging on the screen
without needing to perform the connection operation.
COP
Y