Cop y – Canon PowerShot S110 User Manual
Page 309
309
Troubleshooting
Cannot send images.
•
The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
•
The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card of the
destination camera is set to the locked position. Slide the write-protect tab to the
unlocked position.
•
Images shot in [
] mode are grouped. Cancel grouping and then send the images.
•
RAW images cannot be sent. In [
] mode, only the JPEG images are sent.
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [
] or [
]
to reduce sending time (
•
Movies may take a long time to send.
•
Avoid using the camera’s wireless LAN function around microwave ovens, Bluetooth
devices, and other devices that operate on the 2.4 GHz band, as this will weaken
wireless LAN signals.
•
Note that images may take a long time to send even when [
] is displayed.
•
Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
•
When sending images to a computer from a memory card with a large amount
of images (approximately 1,000), the connection may be disrupted. Import any
necessary images to a computer, and then reduce the number of images on the
memory card by erasing unnecessary images.
Erasing wireless connection information when transferring ownership
of or disposing of the camera.
•
Reset the wireless LAN to default settings (
COP
Y