Canon PowerShot S110 - Manual (Page 175)

175
Color and Continuous Shooting
Still Images Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
z z Follow the steps on = 174 and choose
[ ] or [ ].
z z Aim the camera at a plain white subject,
so that the entire screen is white. Press
the < > button.
X X The tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
• You can also record white balance data on the screen above by touching
[ ].
Still Images Movies
Manually Correcting White Balance
You can correct white balance. This adjustment can match the effect of
using a commercially available color temperature conversion filter or color-
compensating filter.
1
Configure the setting.
z z Follow the steps on = 174 to choose
[ ].
z z Turn the < y> ring to adjust the correction
level for B and A.
X X Once the setting is complete, [ ] is
displayed.
COP
Y