Canon PowerShot S110 - Manual (Page 237)

237
Protecting Images
• Protected images on a memory card will be erased if you format
the card ( = 267, 268).
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Choosing Images Individually
1
Choose [Select].
z z Following step 2 on = 236, choose
[Select] and press the < m> button.
2
Choose an image.
z z Press the < q><r> buttons or turn the
< 7> dial to choose an image, and then
press the < m> button. [ ] is displayed.
z z To cancel selection, press the < m>
button again. [ ] is no longer displayed.
z z Repeat this process to specify other
images.
3
Protect the image.
z z Press the < n> button. A
confirmation message is displayed.
z z Press the < q><r> buttons or turn the
< 7> dial to choose [OK], and then press
the < m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
• You can also select or clear images by touching the screen in step 2, and
you can access the confirmation screen by touching [ ].
• You can also protect images by touching [OK] on the screen in step 3.
COP
Y