Canon PowerShot S110 - Manual (Page 64)

64
Connecting to a Computer
Connecting to a WPS Supported Access Point
WPS (Wi-Fi Protected Setup) is a structure for simplifying settings when
connecting one wireless LAN device to another. You can use either
Push Button Configuration Method or PIN Method for settings on a WPS
supported device.
The push button configuration method is used in the following explanation.
• Refer to the user guide provided with your access point to check if it supports
WPS.
4
Choose [WPS Connection].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [WPS Connection],
and then press the < m> button.
5
Choose [PBC Method].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [PBC Method], and
then press the < m> button.
COP
Y