Canon PowerShot S110 - Manual (Page 120)

120
Using Face ID
5
Register face information.
z z Follow steps 2 – 3 on = 114 to
shoot, and then register the new face
information.
z z Registered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smiling, and shots inside and
outside.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at
least one slot open, however you cannot overwrite any face information.
Instead of overwriting face info, first erase unwanted existing info (see
below), and then register new face information as needed.
Erasing Face Information
1
Access the [Check/Edit Info]
screen.
z z Following step 1 on = 113, choose
[Check/Edit Info] and press the < m>
button.
2
Choose the name of the person
whose face info you want to
erase.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose the name of
the person whose face info you want to
erase, and then press the < m> button.
COP
Y