Canon PowerShot S110 - Manual (Page 211)

211
Customization for Shooting Styles
Still Images Movies
Assigning Functions to the < > Button
1
Access the setting screen.
z z Press the < n> button, choose [Set
button] on the [ 4] tab, and then
press the < m> button (= 91).
2
Configure the setting.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose a function to
assign, and then press the < m> button.
3
Use the assigned function as
needed.
z z Press the < > button to activate the
assigned function.
• To restore default settings, choose [ ].
• Icons labeled with [ ] indicate that the function is not available in the
current shooting mode or under current function conditions.
• With [ ], you can move and resize the AF frame by pressing the < >
button in [1-point] AF frame mode ( = 185).
• When the [ ] or [ ] function is used, each press of the < > button
records white balance data ( = 175), and the white balance settings change
to [ ] or [ ].
• When the [ %] function is used, each press of the < > button adjusts and
locks the focus, and [ %] is displayed on the screen.
• Pressing the < > button when the [ ] function is used deactivates screen
display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
• You can also configure settings by touching a desired option and then
touching it again or touching [ ].
COP
Y