Cop y – Canon PowerShot S110 User Manual
Page 55
55
Connecting to Another Camera
3
Choose [Add a Device].
z
z
Press the <
o><p> buttons or turn the
<
7> dial to choose [Add a Device], and
then press the <
m> button.
z
z
Follow steps 1 – 3 on the target camera.
X
X
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
X
X
When the target camera has been added
successfully, the image transfer screen
will be displayed (
•
To add multiple cameras, repeat the above procedures starting from step 1.
•
Once a camera is added, the camera name will be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera name
from the list.
•
You can also configure this setting through touch-screen operations
(
•
When a connection destination is set using the Touch Actions setting
(
= 248), you can automatically access the function to connect to the last
connected destination from the next time by just dragging on the screen
without needing to perform the connection operation.
COP
Y