Cop y – Canon PowerShot S110 User Manual
Page 271
271
Adjusting Basic Camera Functions
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (
1
Access the [Power Saving]
screen.
z
z
Choose [Power Saving], and then press
the <
m> button.
2
Configure the settings.
z
z
After choosing an item, press the
<
q><r> buttons to adjust it as needed.
•
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
•
The [Display Off] setting is applied even if you set [Auto Power Down] to
[Off].
Metric/Non-Metric Display
Change the unit of measurement shown in the MF indicator (
zoom bar (
= 96), and GPS information for elevation (= 78) from m/
cm to ft/in as needed.
z
z
Choose [Units], and then choose [ft/in].
COP
Y