Canon PowerShot S110 - Manual (Page 157)

157
Special Modes for Other Purposes
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(
= 184). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z z Follow steps 1 – 2 on = 137 and choose
[ ], and then press the < p> button.
z z Press the < q><r> buttons or turn the
< 7> dial to choose [ ], and then press
the < m> button.
2
Compose the shot and press
the shutter button halfway.
z z Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the
way down.
X X The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
X X The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
X X After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z z To cancel shooting after you have
triggered the self-timer, press the
< n> button.
COP
Y