Connecting to a computer, Preparing, To register a computer – Canon PowerShot S110 User Manual
Page 56: Cop y
56
Connecting to a Computer
Configure camera settings for a wireless computer connection, and then
transfer images to the computer wirelessly using the included software
CameraWindow as follows.
•
When connected to a computer, the camera is used to establish the
connection and then the computer (included software CameraWindow) is
used to transfer images.
•
For details on the included software, see the Software Guide.
Preparing to Register a Computer
Prepare to register a computer.
Checking the Computer and Wireless LAN Setup
The camera can connect to the following computers via wireless LAN.
Windows
•
Windows 7 Service Pack 1
Macintosh
•
Mac OS X 10.6.8 or later
•
Windows 7 Starter and Home Basic editions are not supported.
•
Windows 7 N (European version) and KN (South Korean version)
require a separate download and install of Windows Media
Feature Pack.
For further details, see the following websites.
To use wireless LAN, an access point base unit (wireless LAN router, etc.)
connected to a computer is required.
Additionally, the included software, CameraWindow must be installed.
COP
Y