Canon PowerShot S110 - Manual (Page 226)

226
Browsing and Filtering Images
2
Choose the first condition for
image display or navigation.
z z Press the < o><p> buttons to choose a
display filter.
z z When [ ] is selected, you can view
only images matching this condition by
pressing the < q><r> buttons. To perform
an action for all of these images together,
press the < m> button and go to step 4.
3
Choose the second condition
and check the images found.
z z Press the < q><r> buttons to choose
another condition. Once you turn the
< 7> dial, you can view the images
narrowed down by your conditions.
z z To cancel this mode, press the < n>
button.
z z To switch to filtered image display, press
the < m> button and go to step 4.
4
View the filtered images.
z z Images matching your conditions are
displayed in yellow frames. To view
only these images, press the < q><r>
buttons, or turn the < 7> dial.
z z To exit filtered image display, press the
< o> button, and after [Image search
canceled] is displayed, press the < m>
button.
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
COP
Y