Agilent Technologies N2620A - Manual (Page 164)

146 N2620A User’s Guide
6 IP Video Testing with the FrameScope Pro
Running an IP Video Test
Before running the IP Video Test, network settings for the
FrameScope Pro has to be configured. Refer to
Chapter 7 , “Test
Port Settings” on page 171.
1 Press Service Tests on the Main Menu screen to call the Type
Of Service screen. Press IPTV.
2 Select a default profile or press Suite on the IPTV Setting
screen to select a previously-saved IPTV test suite.
3 The default setting runs the test in Terminate mode. Select
Monitor
test mode if you want to tap into a live video stream
initiated by the set-top box. In live monitor mode, you can
monitor up to 10 channels.