Agilent Technologies N2620A - Manual (Page 193)

System Operations 7
N2620A User’s Guide 175
• DNS and NetBIOS Settings - Devices on the network may be
referred to by name. In the DNS, the FrameScope Pro asks
the DNS servers to convert the name to an IP address. When
NetBIOS names are used, the FrameScope Pro asks the WINS
servers to convert the name to an IP address. The DNS
Domain and the DNS and WINS servers can be obtained
through the DHCP and may be typed in manually. If you type
in a DNS Domain, it will be used in place of the DHCP
supplied value. If you type in DNS or WINS servers, they will
be used in preference over the DHCP supplied values.
Press Next when done to access the third Test Port Settings
Setup screen.