Agilent Technologies N2620A User Manual
Page 93
Network Testing with the FrameScope Pro
2
N2620A User’s Guide
75
If Loopback is selected, you have three options:
Option 1:
Select IP Layer loopback device. You will need to
specify the IP address or name of the device.
Option 2:
Select MAC Layer loopback device. You will need to
specify the MAC address of the device.
Option 3:
Select PHY Layer loopback device.
If FrameScope is selected, there are two options:
Option 1:
Select Auto Search to search for the FrameScope Pro
if the IP address or the name of the slave FrameScope Pro is
unknown.
Option 2:
Select Manual if the IP address or the name of the
slave FrameScope Pro is known and type in the
corresponding IP address or name.
4
Selecting Settings allows you to set the timeout (in seconds),
direction of the test, and the data pattern of the test.