Agilent Technologies N2620A - Manual (Page 201)

System Operations 7
N2620A User’s Guide 183
Add Routes Using Routing Table Settings
The Routing Table Settings option allows you to view, delete,
and add new routes to the FrameScope Pro network routing
table.
You can use routes in the FrameScope Pro routing table to
access a network which is normally unreachable if the Test Port
and Auxiliary Port had to use the same gateway, for example, to
remotely control the FrameScope Pro from a separate subnet.
Before adding routes to the routing table, make sure that the
following information is known.
• Default gateway address of the FrameScope Pro access port
• IP address of the subnet of the FrameScope Pro access port
The following procedure describes how to view and add routes
to the routing table.
1 Select Routing Table Settings on the System Settings Network
menu and press Edit to call the Routing Table Settings screen.