Agilent Technologies N2620A User Manual
Page 73
Network Testing with the FrameScope Pro
2
N2620A User’s Guide
55
If Loopback is selected, you have three options:
Option 1:
Select IP Layer loopback device. You will need to
specify the IP address or name of the device.
Option 2:
Select MAC Layer loopback device. You will need to
specify the MAC address of the device.
Option 3:
Select PHY Layer loopback device.
If FrameScope is selected, there are two options:
Option 1:
Select Auto Search to search for the FrameScope Pro
if the IP address or the name of the slave FrameScope Pro is
unknown.
Option 2:
Select Manual if the IP address or the name of the
slave FrameScope Pro is known and type in the
corresponding IP address or name.
Press Next.
Select FrameScope or
Loopback
for the target of
the test.
IP Address (or name) of the
FrameScope Pro or MAC
address of the Loopback,
depending on the selection.
Password Entry
Timeout